enEnglish

Product Introduction

 

 

Jinglang’s light duty cable tray range contains two roll-formed products: the Lightweight Energy Saving Tray and the Corrugated Energy Saving Tray. Both provide metal pathways for organized routing of power, control and communication cables.

 

 

  • Lightweight Energy Saving Tray
    Lightweight Energy Saving Tray
    Engineering projects need to control costs. The price of steel keeps going up. Every kilogram of material costs money. But you cannot use thinner steel because the tray might bend. Our Lightweight...
    read more
  • Corrugated Energy Saving Tray
    Corrugated Energy Saving Tray
    Flat steel needs thickness to stay stiff. Thicker steel costs more. It also weighs more. Our Corrugated Energy Saving Tray uses a different approach. We shape the steel into a wave pattern. The...
    read more
productcate-626-468

 

Key Features

Corrugated base profile — Metal sheet is roll-formed into a wave pattern. This changes the cross-sectional geometry to increase rigidity without relying only on thicker flat sheet metal.

 

Side-rail reinforcement — The Corrugated Energy Saving Tray adds vertical stiffening ribs to its side rails to resist local side-wall deformation.

 

Product Selection Guide

The Lightweight Energy Saving Tray and Corrugated Energy Saving Tray are available in widths from 60 to 1000 mm, side-rail heights from 40 to 200 mm and a standard straight length of 2000 mm. Steel and stainless-steel sheet thicknesses are 1.0, 1.2, 1.4 or 1.5 mm, depending on tray width. Select the tray dimensions to accommodate the required cable space and check cable bend radii at changes in direction. Confirm the allowable distributed load and deflection for the selected size, thickness and actual support span against the cable weight per metre; “light duty” alone does not define a load rating.

productcate-675-506

 

 

modular-1

Applications

 

  • Commercial buildings — Cable runs above ceilings and through service corridors in office buildings, shopping centers, hotels and healthcare facilities.
  • Industrial control routes — Control and instrumentation cabling between panels and equipment in factories and plant service areas, where the specified tray load and span are suitable.
  • Low-voltage and IT systems — Structured cable routes in communications rooms, equipment rooms and building service shafts, with cable segregation set by the electrical design.

Efficiency leap Precision and stability

 

Adopting high-performance integrated joints,the CRA series can increase the tempo by 25%,and the productivity can reach a new peak;the vibration suppression algorithm is upgraded to achieve a good anti-shaking effect;the full-parameter DH compensation algorithm and TrueMotion algorithm are supported,and the absolute positioning accuracy is 0.2 ~ 0.4 mm under the change of attitude movement,and the curved motion is precise and stable.

modular-2
modular-1

Customization Options

 

Jinglang supports OEM/ODM production from drawings or physical samples. Designs undergo a feasibility review, with drawings and samples approved before bulk production.

  • Materials and finishes — Options include Q235 carbon steel with powder coating, hot-dip galvanizing or zinc-aluminum-magnesium coating; stainless steel 304 or 316; and aluminum 6063.
  • Dimensions and appearance — Non-standard dimensions, connection details and powder-coat colors can be defined in approved drawings. Alternative lengths of 3000 mm and 6000 mm are available.

Installation & Accessories

 

Corrugated splice plates and couplers connect straight sections. Fittings include 90° bends, tees, crosses, reducers and end caps; supporting hardware includes brackets and drop rods.

 

Install supports before connecting tray sections. Align joints, tighten fixings to the approved assembly details, deburr field cuts and restore affected surface protection as specified. Use the approved layout for support positions around bends and branches.

modular-2

 

Quality Control

Jinglang uses incoming material inspection, operator self-inspection and cross-checks during production, followed by 100% piece-by-piece inspection before packing. The final checks cover straightness and twist, length, width, height, sheet thickness, hole positioning and welds where present

Inspectors also check for incomplete surface coverage, scratches, corrosion and burrs.

 

Passed items are marked before packing. SGS, Bureau Veritas or Intertek inspections can be arranged during production or before packing; scope and fees are agreed in advance.

 

 

Frequently Asked Questions
 
 

What is the minimum order quantity for light duty cable tray?

 

-

There is no fixed MOQ. Orders starting from 1 m are accepted, with unit pricing based on the order quantity.

How are light duty cable trays packed for export?

 

-

With moisture-resistant inner film and wooden cases or pallets, selected according to the destination and transport method.

Can a metal cable tray replace the equipment grounding conductor?

 

-

Only if the complete system meets the applicable electrical code; grounding and electrical continuity must be verified.

Can a corrugated light duty tray be installed vertically?

 

-

Yes, when the design includes suitable vertical supports and separate cable restraints sized for the installed cable weight.

As one of the most professional light duty cable tray manufacturers and suppliers in China, we also support customized service. We warmly welcome you to wholesale high quality light duty cable tray in stock here from our factory. If you have any enquiry about quotation, please feel free to email us.

Corrugated Energy Saving Tray, light duty cable tray, Lightweight Energy Saving Tray
Popular Products
Send Inquiry